Mach3 CNC Controller Software for Milling WinXP & 2000. Artsoft has been in the CNC business for the past 6 years. In this time the Mach series of CNC software has evolved to be the best available PC, CNC software on the market. Not only is it extremely affordable to industry, and the hobbyist, it is pioneering in its features, and continuing development. There are over 10000 users of Mach who swear by its ease of use, great features and support. Most ArtSoft software uses the Printer ports of your PC-Compatible Computer to drive Step and Direction type Stepper Motor and Servo Controls.

Artsoft has been in the CNC business since 2001. In this time, the Mach series of CNC software has evolved into the best available PC-based CNC software on the market. Not only is it extremely affordable to the hobbyist and industry alike, it is pioneering in its features and continuing development. There are over 10000 users of Mach who swear by its ease of use, great features, and outstanding support.

This video has been prepared by MakeCNC.com as an introduction to setup and use of the Sherline CNC lathe. It starts with basic out-of-the-box assembly and alignment and then covers the basics of g-code and getting started in CNC. A simple project is turned as an example. Though the video demo is cut using a Windows program called Mach3, working with the CNC lathe is accomplished in a similar fashion using the Linux operating system and EMC software included with your Sherline CNC lathe. For those new to both a Sherline lathe and to CNC this makes a good basic introduction to both and will get you from the shipping box to your first cuts. MakeCNC.com has also produced a video on using the CNC mill. It is available as P/N 5345.

This video has been prepared by MakeCNC.com as an introduction to setup and use of the Sherline CNC mill. It starts with basic out-of-the-box assembly and alignment and then covers the basics of g-code and getting started in CNC. Basic navigation of the Linux/EMC screens is covered and a simple project is cut as an example of using g-code. There is also a brief description of an alternative g-code program called Mach3 that runs under Windows. For those new to both a Sherline mill and to CNC this makes a good basic introduction to both and will get you from the shipping box to your first cuts. MakeCNC.com has also produced a video on using the CNC lathe. It is available as P/N 5340.

This video has been prepared by MakeCNC.com as an introduction to setup and use of the Sherline CNC mill. It starts with basic out-of-the-box assembly and alignment and then covers the basics of g-code and getting started in CNC. Basic navigation of the Linux/EMC screens is covered and a simple project is cut as an example of using g-code. There is also a brief description of an alternative g-code program called Mach3 that runs under Windows. For those new to both a Sherline mill and to CNC this makes a good basic introduction to both and will get you from the shipping box to your first cuts. MakeCNC.com has also produced a video on using the CNC lathe. It is available as P/N 5340.